Three installation methods of LED panel light
Release Time:
2022-09-30
Make several screw holes on the ceiling, then install the LED panel light slide in ceiling frame on the ceiling, fix the three sides, then slide the panel light into the fixed slide in installation frame, and then fix the screw fixed frame on the fourth side.
1、 Support fixed type
Make several screw holes on the ceiling, then install the LED panel light slide in ceiling frame on the ceiling, fix the three sides, then slide the panel light into the fixed slide in installation frame, and then fix the screw fixed frame on the fourth side.
2、 Steel wire suspension type
Fix the suspension wire installation parts on the ceiling, lock the screws (the suspension wire has been installed when leaving the factory), and hang the components on the back of the LED panel lamp. The installation is convenient and convenient.
3、 Embedded
Install a sheet metal groove on the ceiling, and then fix several protruding brackets on the back of the LED panel lamp, and then put the panel lamp in so that the bracket matches the sheet metal groove on the ceiling, and then it can be fixed on the ceiling. However, due to the different thickness of various ceilings, it is necessary to adjust the height between the light surface and the bracket, otherwise the LED panel light will be higher or lower than the ceiling surface after installation.
Key words:
LED
Related News
Zhejiang Jinling Lighting and Electrical Appliances Co., Ltd.
Headquarters Address: No. 6, Bifa Road, Xinbi Industrial Park, Jinyun County, Zhejiang, China
Tel: +86-578-3174166
Email: jlgycwb@126.com
Jiangmen Jinhong Lighting Co., Ltd.
Branch Address: No. 47, Keyuan West Road, Jianghai District, Jiangmen, Guangdong, China
Tel: +86-750-3761000
Fax: +86-750-3761085
Follow WeChat
Copyright © 2022 Zhejiang Jinling Lighting and Electrical Appliances Co., Ltd.