How to install and use LED ceiling lamp?
Release Time:
2022-09-30
When installing ceiling lamps in masonry structures, embedded bolts or expansion bolts, nylon plugs or plastic plugs shall be used to fix them. Wooden wedges are not allowed. And the bearing capacity of the above fixing parts shall match the weight of the ceiling lamp

Installation and use of led ceiling lamp
1. When installing ceiling lamps in masonry structures, embedded bolts or expansion bolts, nylon plugs or plastic plugs shall be used to fix them. Wooden wedges are not allowed. Moreover, the bearing capacity of the above fixing parts shall match the weight of the ceiling lamp to ensure that the ceiling lamp is firmly and reliably fixed and its service life can be extended.
2. When expansion bolts are used for fixation, the bolt specifications shall be selected according to the technical requirements of the product, and the drilling diameter and burial depth shall be consistent with the bolt specifications.
3. The number of bolts for fixing the lamp base shall not be less than the number of fixing holes on the lamp base, and the bolt diameter shall match the hole diameter. For lamps without fixed mounting holes on the base (self drilling during installation), each lamp shall have at least 2 bolts or screws for fixing, and the center of gravity of the lamp shall be consistent with the center of gravity of the bolts or screws.
4. LED ceiling lights cannot be directly installed on combustible objects. Some families use painted plywood to line the back of ceiling lights for aesthetic purposes. In fact, this is very dangerous, and thermal insulation measures must be taken; If the high temperature part of the lamp surface is close to combustibles, thermal insulation or heat dissipation measures shall also be taken.
Key words:
LED
Related News